Connect your MP3, iPod, Zune, CD player or any other device with a stereo
headphone plug to your factory GM stereo. Have CD quality sound from your
stock stereo! If you have the ability to get the stereo out of the dash of
your car, YOU can do this simple modification yourself! SAVE YOURSELF HUNDREDS!
Why spend BIG bucks on a new stereo to plug in your new mp3 or iPod that won't
fit in the space provided by GM?
Why wait on an auction for a stock radio (like the one you already have) with
the plug in the face of it?
Who cares if your tape deck functions? You'll never listen to it again anyway!
And if the tape deck does still work, it will continue to work after this
modification. This modification does not affect the normal operation of
the radio or tape deck in any way.
You can modify YOUR stock Delco UM6 or UX1 stereo to do the SAME thing for
FAR less! Keep your stereo looking stock, and locate the plug wherever YOU
want! In the glove box. In the console. On the dash. Or in the stereo itself.
Just about anywhere it'll fit.
No FM transmitter. No Tape adapter. Connects directly to the amp. Plug in
your device, turn it on, and you've got CLEAN SOUND! No switch, button, adapter,
transmitter, splitter or hub. It works like you were listining to the radio
and put a cd in. Its totally automatic!
BUY-IT-NOW for $40 dollars US and get FREE SHIPPING
to the lower 48 states!!!
This modification will require that you open the radio (3 screws) and make
4 solder connections. It is VERY easy. You will need a sharp knife, a ¼
inch nut driver or socket, wire cutters, pliers, and a small soldering iron
and solder. Everything else is provided.
I use only the highest quality parts. Shielded multi-conductor cable and 100%
soldered and shrink tube connections, unlike others that sell complete radios
and use un-shielded wire wrapped in tape.
This adapter kit consists of a 30 inch long cord (longer cords are available
for $1.00 extra per foot) with a female 1/8(3.5mm) stereo plug on one end,
an extra ground lug, heat shrink tubing, and detailed instructions. You will
need a 1/8 inch stereo male-to-male cord to plug the 2 components together
(about 5 bucks at Radio Shack).
UM6 UX1 Fits 1982-1995 Chevrolet Celebrity, Pontiac 6000, Oldsmobile Ciera,
Buick Century, Blazer, Jimmy, Camaro, Z-28, IROC, GTA, Firebird, Fiero, Trans
Am, Regal, Corvette, S-10, S-15, C-10, C-20, Z-24, Cavalier, Sunbird, Cimarron,
Cadillac, Cutlass, Astro, Monte Carlo, and any other GM Delco stereos that
resemble the ones below. It may also work up to '99 but it has not been tested
yet, although the wiring looks the same. It will NOT work on the Delco
Bose systems. It may work on the late '70s GM Delco shaft stereos,
as I have seen them on E-Bay with the same plug already installed. I do not
however know how to do it.
I cannot offer a warranty or return on this item as this is a "Do-It-Yourself" project. However it WILL work if the directions are followed.
I sold these on E-Bay for several years, and I got tired of paying their
fees.This is now the ONLY place to get this kit!
